SEI ADVISOR AE100, Programming And Installation Manual, Page: 25 / 46

8
ADJUST MIC AUDIO - SPEAK INTO THE MIC AT A NORMAL LEVEL AND ADJUST
THE MIC LEVEL (2) SO IT DOES NOT EXTENT OVER THE RED LINES (1)
ADJUST RECEIVER AUDIO - FEED A SIGNAL INTO THE
RADIO WITH 1000HZ AT 1.5 KHZ DEV AT 90DBM.
ADJUST THE REC LEVEL (7) SO IT DOES NOT EXTEND OVER THE RED LINES (1)
(YOU CAN CLICK ON THE SLIDER AND USE THE ARROW KEYS)
ADJUST THE VOX LEVEL (8) SO ANY SYSTEMIC NOISE DOES NOT EXTEND OVER
THE GREEN LINES (3)
MIC AND REC AUDIO CAN BE GATED (4) W/ HIGH OR LOW OUTPUTS (5)
(EXAMPLE: A COR OR A CTCSS DECODE CAN GATE THE REC AUDIO. A PTT LEVEL
CAN GATE THE MIC AUDIO)
ADVISOR SLAVE (6) - IF CHECKED - THE RECORDER ONLY RECORDS WHEN THE
ADVISOR IS TRIPPED (ADVISOR RELAY MUST BE PROGRAMMED FOR “ ON UNTIL
RESET ”
1
2
3
4
5
1
6
7
TABLE OF CONTENTS