PA/LIGHTS
J3 RJ45 CAT 5
1 ROOM LIGHT RELAY BROWN
2 ROOM LIGHT RELAY WHITE/BROWN NORMALLY OPEN
3 RED LIGHT RELAY GREEN
4 RED LIGHT RELAY WHITE/GREEN NORMALLY OPEN
5 ALERT RELAY ORANGE
6 ALERT RELAY WHITE/ORANGE NORMALLY OPEN
7 AUDIO TO PA AMP BLUE
8 AUDIO TO PA AMP WHITE/BLUE BALANCED AUDIO
SHIELDED CAT 5
CAN BE USED IN HIGH RF ENVIRONMENTS.
Cat 5 Cable is run to the Equipment Room to connect to the PA Amplifier.
The
Lights can be Controlled Remotely through the Building Wiring
using
PULSE WORX
Wall Switch Receivers, Receiver Modules and Transmitter Modules.
Transmitter Unit
Uses
the Relay Contacts from
the Advisor to Activate/
Deactivate the Wall
Switches or the Plug
-
in
Modules
Wall Switch
gets a Signal
from the Transmitter Unit
to Turn On or Off
Plug
-
in Module
gets a
Signal from the Transmitter
Unit to Turn On or Off
Summary of Contents for ADVISOR AE100
