SEH myUTN-52, Quick Installation Manual

Page: 13 / 32

Quick Installation Guide [en] 13
Connecting the USB Device to the Client
The USB devices in the selection list can be connected to the client.
Makte sure that:
- All provisions (driver installation, etc.) necessary to operate the device locally
(i.e. connected directly to the client) have been met on the client. Ideally, the
device has been connected and operated on the client locally according to
the instructions of the manufacturer.
- The device is not connected to another client. A device that was made
available by the UTN server can only be used by one network participant at a
time.
Proceed as follows:
1. Mark the relevant USB device in the selection list.
2. Select Device – Activate from the menu bar.
The connection will be established.
Close the connection to the device when the device is no longer needed. Select
Device – Deactivate from the menu bar.