SEH myUTN-52, Quick Installation Manual

Page: 12 / 32

12 [en] Quick Installation Guide
Adding the UTN Server to the Selection List
In order to connect a UTN server to a client, you must assign the UTN server to
the selection list. Put together a selection list with your preferred UTN servers.
Proceed as follows:
1. Select Selection List – Edit from the menu bar.
The Edit Selection List dialog appears.
2. Select the UTN server from the network list.
3. Click Add .
4. Click OK .
The UTN server is shown in the selection list.
You can extend the search for UTN servers to any network range. To do this, change the
search parameters for the network scan via the
Options dialog in the Program menu.