Device Settings
myUTN User Manual Windows
55
The settings are saved.
4.6
How to Deactivate a USB Port (only myUTN-80
and later)
You can enable or disable a USB port. This is done by interrupting
and re-establishing the power supply.
The power supply for the USB ports is enabled by default.
Benefits and
Purpose
Disable unused USB ports in order to ensure that unwanted USB
devices cannot be connected to the network. Deactivated USB ports
cannot be seen in the SEH UTN Manager.
This function also allows you to turn a USB device off and on again
without having to manually remove or reconnect it. USB devices
that are in an undefined state, can be restarted by interrupting and
re-establishing the power supply of the USB port.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
DEVICE – USB port
.
3. Tick/clear the option in front of the USB port.
4. Click
Save
to confirm.
The power supply of the USB port is established or interrupted.
4.7
How to Use the Notification Service (only
myUTN-80 and later)
You can get notifications in the form of emails or SNMP traps from
the UTN server. By means of these notifications up to four recipients
can be informed about various events irrespective of time and loca-
tion.
The following message types are possible:
• The status email periodically informs the recipient about the
status of the UTN server and the connected USB devices.
