Security
myUTN User Manual Windows
108
6.9
How to Encrypt Data Transfer
You can encrypt the data transfer between the clients and the UTN
server (and the connected USB devices).
Only payload will be encrypted. Control and log data will be trans-
mitted without encryption.
Encrypted connection means that client and UTN server communi-
cate via the UTN SSL port. The port number 9443 is preset. To
change the port number, see:
Fig. 16: UTN Server - SSL/TLS Connection in the Network
To use an SSL/TLS connection you must enable the encryption at the
relevant USB port. The encryption strength is defined via the
encryption protocol and level
83.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
SECURITY – Encryption
.
3. Enable the encryption at the USB port.
4. Click
Save
to confirm.
The data between the clients and the USB device will be
transferred in an encrypted way.
USB port 1
UTN server
UTN port
USB port 2
UTN SSL port
SSL/TLS connection
