Segway SGW1000F-S3, Owner'S Manual

Page: 48 / 120

3-5
Driving through water
Your vehicle can operate through water with a maximum 40cm. Follow these
precautions when operating through water:
!
CAUTION
Major engine damage can result if the vehicle is not thoroughly
inspected after operating in water. Perform the services
outlined in the Periodic Maintenance Chart. The following
areas need special attention: engine oil, transmission oil,
demand drive fluid and all grease fittings. If the vehicle tips
or overturns in water, or if the engine stops during or after
operating in water, service is required before starting the
engine. Your dealer can provide this service. If it's impossible
to bring the vehicle in before starting the engine, perform
the service outlined in the Vehicle Immersion section of
this manual, and take the vehicle in for service at the first
opportunity.
1. Determine water depths and current before entering water.
2. Choose a crossing where both banks have gradual inclines.
3. Avoid operating through deep or fast-flowing water.
4. After leaving water, test the brakes. Apply them lightly several times while
driving slowly. The friction will help dry out the pads. If it’s unavoidable to enter
water deeper than the footrest level:
• Proceed slowly. Avoid rocks and obstacles.
• Balance your weight carefully. Avoid sudden movements.
• Maintain a steady rate of speed. Do not make sudden turns or stops. Do not
make sudden throttle changes.