Segway SGW1000F-S3, Owner'S Manual

Page: 38 / 120

2-17
EPS system
Indicates a failure in EPS system (optional
equipment, if equipped)
Brake system
• Low brake fluid level
• The braking system is faulty
Parking Brake This light is on after parking brake is applied.
Engine Failure
This indicator appears if an EFI-related fault occurs.
Do not operate the vehicle if this warning appears.
Serious engine damage could result.
ABS
Coolant
Temperature
Indicator light showing excessive temperature of
engine coolant. When it lights up and alarms, the
engine should be stopped immediately and shut
down. After cooling down to normal temperature, the
engine should continue to run.
Left Turn Left Turn
(if equipped)
This light is lit when the left turn signal is turned on.
High Beam High Beam
light
light
This lamp illuminates when the headlamp switch is
set to high beam.
Position light Position light
The front light, tail light, license plate light and
instrument panel light are on.
Right turn
(if equipped)
This light is lit when the right turn signal is turned on.
Power icon on
Bluetooth The icon will light on when the APP Bluetooth power
is used.
Remote Power
on When starting the vehicle through the APP and this
light will be on
EPS mode
EPS mode was set in the APP and the preferred
mode of the rider was selected:
M
-Normal mode, power normal
H
-Comfort mode, power light
L
-Motion mode, booster weight