Segway p Series, User Manual, Page: 32 / 52

32
tr
ou
bl
es
ho
ot
in
g a
nd d
ispl
a
y
i
c
ons
Display Messages
The Display on the Handlebar indicates the following information:
> The operational mode of the Segway HT (Power Assist Mode or Balance Mode)
> The battery charge level
> Whether a fault is detected in any system
It is important to understand all the icon messages that may appear in the Display.
Display Colors
Green (and only green) means you may step on and ride in Balance Mode. Orange
indicates Power Assist Mode. Red means something is wrong.
If the Display is in direct sunlight, it may be difficult to see the color and the icon. Try
shading the Display with your hand. If the Display is not illuminated, the Segway HT is
not powered on.
Startup Error Conditions
If you attempt to power on your Segway HT, but the Segway HT detects a condition
that precludes power on, one of the following icons will appear in the Display. You may
clear these conditions with the user response described.
WARNING!
Do not attempt to step on the Segway HT until you have cleared the error
condition and you have confirmed that the Segway HT is in Balance Mode.
Display Icon Startup Error Conditions User Response
The Key being used to start
the Segway HT does not
contain the correct security
code. Restart using correct Key. If
condition continues, contact
an Authorized Segway Dealer.
The Segway HT is plugged in. Unplug the Power Cord and, if
the Segway HT has powered
off, power on again.
The battery is too low to allow
safe operation of the
Segway HT. Charge the Battery Packs;
then attempt to power on.
The Steering Grip is turned to
the left at startup. Be sure your hand is not
turning the Steering Grip.
Gently move the grip to
ensure it is in the center
(straight-ahead) position.
The Steering Grip is turned to
the right at startup.
(red)
(red)
(red)
(red)
(red)