Segway p Series, User Manual, Page: 21 / 52

21
hel
p
fu
l h
in
ts
Do Not Tow Anything With Your
Segway HT
Although your Segway HT is versatile, you should not
attempt to tow or push anything with it. If you try to tow
a trailer or other item, you may not be able to stop in a
safe manner, turn effectively, or handle various terrain
features.
Using the Parking Stand
(i Series only)
To deploy the Parking Stand:
1. Make sure the power is off.
2. Tilt the Segway HT back toward you.
3. Turn the lever at the right front corner of the
Platform to the left until it is perpendicular to the
Fender.
4. Move the Handlebar forward until the Segway HT
rests on the Parking Stand. The Platform will be
tilted backward to discourage anyone from stepping
on.
To retract the Parking Stand:
1. Make sure the power is off.
2. Tilt the Segway HT back toward you.
3. Turn the lever at the right front corner of the
Platform to the right until it is parallel to the
Fender.
Reminders:
> Make sure you power off before tilting the
Segway HT back toward you. Do not tilt the Segway
HT back toward you when in Balance Mode. This
could cause the Segway HT to back up into you and
could cause injury.
> Retract the Parking Stand before you attempt to
stand on or move the Segway HT.
The Parking Stand will support only an unloaded
Segway HT and may break (or cause a fall) if you
attempt to stand on or move the Segway HT with
the Parking Stand deployed.
This is a safety feature to reduce risk of injury from
operating a Segway HT with the Parking Stand
deployed.
> Use the Parking Stand on relatively level ground. It
will not work on a slope.