Sega TOP SKATER, Owner'S Manual

Page: 40 / 107

37
BOARD SETTING
SWING/BANK THE BOARD
AS FAR/DEEP AS POSSIBLE.
BEFORE EXITING [ BOARD SETTING ] ,
SET THE BOARD IN THE CENTER/FLAT POSITION.
MESSAGE
CURVING SLIDE
DATA 80 80
CENTER 80 - 80 80 - 80
MINIMUM 4f - 4f 3e - 3e
MAXIMUM b1 - b1 c2 - c2
PRESS TEST BUTTON TO EXITt
Enter the BOARD SETTING mode.
Select MANUAL and press the TEST BUTTON. the screen changes to 7.10c.
Get on the Skate Board, operate for right/left CURVING and inclination SLIDE evenly in both directions to
set the minimum/maximum Volume values. At this time, setting a wider input range makes turning more
difficult in actual play and setting a narrower input makes turning easier.
Set the Skate Board in the center direction and level position. What is set at this time is the CENTER value.
Press the TEST BUTTON to exit from BOARD SETTING to display BOARD SETTING DATA HAS BEEN
UPDATED message and change the setting. The screen returns to the MENU MODE.
If the Board is not operated and settings are not changed, the message of “THE BOARD SETTINGS HAS
NOT BEEN CHANGED. BACKUP DATA HAS NOT BEEN UPDAED” is displayed.
When exiting from the BOARD SETTING screen without setting the Skate Board to the center position, the
machine will determine the inclination and angle of the Skate Board at that time as the center position and
therefore, the game can not be played satisfactorily.
When the Skate Board is set to the center postion, if the Volume value is not within the range of 80H-/+8,
then the Volume gear engagement fault an Volume malfunctioning may be considered. By referring to
section 8, take appropriate countermeasures.
MANUAL SETTING
Fig. 7.10c MANUAL SETTING