Sega The House of the Dead 4, Owner'S Manual, Page: 118 / 202

− 113 −
● You must set AUTO ADJUST Mode to ON for this product.
● You must set Frame Lock to ON for this product.
● To abort adjustment without recording any changes press the ADJUST
button twice (in some instances three times) to return to Normal Mode.
AUTO ADJUST ON/OFF (Press the PHASE button at step 3)
Setting the AUTO ADJUST Mode to ON will automatically determine the timing signal and the
image will be displayed in the normal screen position.
Setting AUTO ADJUST Mode to OFF will display the image according to the timing signal
recorded in the projector.
FRAME LOCK ON/OFF (Press the POSI button at step 3)
If Frame Lock is set to OFF then "snow" may appear on the screen when displaying moving
images. If this happens setting the Frame Lock to ON is advised.
1
2
ADJUST MODE
3
AU T O ADJUST ON
2
3
1
W/B
WRITING
R
G B
ADJUST
CUT OFF
DRIVE
CT-90245
▲
▼
ADJUST
SERVICE
SPECIAL
P
CONTRAST BRIGHT TP
PHASE
CLOCK
POSI
CAPTURE VIDEO RGB
DIGITAL A B C
SPECIAL MODE
Normal Mode
SPECIAL MODE
Press the ADJUST button.
Press the SPECIAL button.
Press the PHASE button.
The projector will enter ADJUST
Mode and wait for an adjustment
category button to be pressed.
The projector will enter SPECIAL
Mode and await further selections.
The current setting (ON/OFF) will
be displayed.
Press the PHASE button again to
change this setting.
If you wish to finish without
changing the setting, press the
ADJUST button three times to
return to Normal Mode.
The setting will be automatically
recorded and the projector will
return to Normal Mode.
SPECIAL Mode: Auto Adjust and Frame Lock Settings