Sega The House of the Dead 4, Owner'S Manual, Page: 104 / 202

− 99 −
● To abort adjustment without recording any changes press the ADJUST
button twice (in some instances three times) to return to Normal Mode.
● If you wish to carry on and make further adjustments to a different
menu repeat 2 〜 3.
● If you do not record adjustment data then all adjustments will be lost
when the power if turned off, and when it is turned back on the
projector will be returned to the state prior to adjustment.
● Mistaken adjustment of the brightness can reduce the quality of the
projected image. It is therefore recommended that the factory setting
by used.
Adjusting the brightness will alter the display of the black parts of the image.
1
2
ADJUST MODE
3
4
ADJUST MODE
BRIGHTNESS 030
↑↓
ADJUST MODE
BRIGHTNESS 030
↑↓
Writing..
2
3
1
4
W/B WRITING
R
G B
ADJUST
CUT OFF
DRIVE
CT-90245
▲
▼
ADJUST
SERVICE
SPECIAL
P
CONTRAST BRIGHT TP
PHASE
CLOCK
POSI
CAPTURE VIDEO RGB
DIGITAL A B C
Press the ADJUST button.
Press the BRIGHT button.
Use the ADJUST [▲] [▼] buttons to make adjust-
ments.
Press the WRITING button (record and finish).
The projector will enter ADJUST
Mode and wait for an adjustment
category button to be pressed.
The projector will enter the
BRIGHTNESS Adjust Mode.
The values of the adjustment data
will change. Continue to make
adjustments until the screen's
brightness suits your needs.
The message "WRITING" will be
displayed, and the adjusted data
recorded.
Adjusting Brightness