Sega ROYAL RUMBLE, Installation & Service Manual

Page: 8 / 27

6
INSTALLATION INSTRUCTIONS
10) Proceed to place new decals on the sides of the cabinet. Locate a new monitor bezel, if needed, and
replace glass, if required (due scratches). Install Instruction Placard to the back of the Monitor Glass.
NOTE: As a precaution, disconnect the JAMMA Harness from the I/O Boards and turn power on. With a
Multi-Meter, measure the 5v and adjust if necessary to 5.15v DC. Measure the +12, -12 and -5 to ensure the
wires and voltages are in the correct position. Turn power off. Plug in the JAMMA Harness once again to
the I/O Boards. The Attract Mode should appear on the screen.
Adjust the
SIZE
,
CONTRAST
,
BRIGHTNESS
, and
COLORS
on the
Monitor for optimum appearance. Adjust
VERTICAL/HORIZONTAL
Hold to get a stable picture, if required.
Enter
DIAGNOSTICS
and adjust the Volume Level, test all Buttons &
Joystick for proper operation & wiring. Adjust Pricing. Coin-Up and
test out a game to ensure proper play functions are as they should be.