Sega Rally 2 DX Owner'S Manual Download Page 29

Page: 29 / 129

FIG. 7.4 STEERING REACTION TEST

STEERING REACTION TEST

CENTERING

OFF

RIGHT

OFF

LEFT

OFF

FORCE

OFF

>EXIT

PRESS TEST BUTTON TO CONTINUE

7 - 4 STEERING REACTION TEST

This test allows Steering Wheel reaction mechanism to be

tested and eaction force to be set. Press the Service Button to

bring the arrow to the desitred item to be selected, and press the

Test Button to enter the selected item.

CENTERING

Press the Test Button or the Start Button to apply automatic

centering to Steering Wheel.

RIGHT

The Steering Wheel turns up to the RIGHT maximum value.

LEFT

The Steering Wheel turns up to the LEFT maximum value.

FORCE Adjusts the Steering Wheel’s reaction force.

0/15 (minimum)<--->15/15 (maximum)

This on-screen adjustment will be effective whent he Test Mode is exited. Turning power off while the on-screen

display is shown will have the pre-adjustment reaction force remain as it is.

Summary of Contents for Rally 2 DX


































































































































Search results

Summary of Contents for Rally 2 DX

Reviews:

Related manuals for Rally 2 DX

Brands by name

Popular brands

Sega Rally 2 DX, Owner'S Manual

Search results

Summary of Contents for Rally 2 DX

Reviews:

Related manuals for Rally 2 DX

Brands by name

Popular brands