background image

17

6 . CONTENTS OF GAME

The following explanations apply to the case the product is functioning satisfactorily. Should there be any moves

different from the following contents, some sort of faults may have occured. Immediately look into the cause of the

fault and eliminate the cause thereof to ensure satisfactory operation. During the Advertise mode, the Billboard’s

Decoration Lamp lights up periodically. When the machine is energized, the Billboard’s Fluorescent Lamp is always lit.

The Steering Wheel repeats centering action periodically. Automatic centering will apply to the Steering Wheel if it is

not centered. During the Advertise Mode, sound is emitted fromt e Speaker beside the Monitor.

HOW TO PLAY

Get in the machine. the seat position is adjustable

forward and backward. Facing the monitor, you will find

the Lever on the lower right-hand side. Pull the Lever to

adjust the seat position.

Insert a coin(s). Insert one play worth of coins to have

the Select Mode appear. Up to 9 credits can be counted

at a time. Coins inserted after counting 9 will not be

counted or rejected. Credits will not be displayed after

Select Mode.

When a coin is inserted in one of the linked seats, the

monitor(s) of the other seat(s) will be in the entry

acceptance mode and countdown starts. For entry, insert

a coin during countdown.

In the case of 1P play, in the SELECT mode, choose either of CHAMPIONSHIP MODE or PRACTICE MODE. Turn

the Steering Wheel to select and confirm by stepping on the Accelerator. In the communication play, PRACTICE

MODE is selected compulsorily.

When the SELECT mode is displayed, countdown starts. When countdown reaches 0, the course and car being

selected will automatically be decided.

After stepping on the Accelerator to confirm, you will proceed to the next SELECT mode in the middle of the count-

down by further stepping on the Accelerator.

1

2

3

4

Summary of Contents for Rally 2 DX


































































































































Reviews: