Sega PRIMEVAL HUNT, Owner'S Manual

Page: 94 / 137

LAMP REPLACEMENT
87
13
FLUORESCENT LAMP REPLACEMENT 13
• When working with the product, be sure to turn the power off. Working with the
power on may cause an electric shock or short circuit.
• There is danger that hot lamps can cause burns. Exercise due caution when
replacing lamps.
• Use lamps of the specified ratings. Using lamps with different ratings may cause
fires or damage.
• Such things as deteriorated insulation in lighting fixtures can cause a short circuit
and/or smoke. Make sure there are no abnormalities. For example, check if you can
smell anything burning, if any sockets have been discolored and if the lamp has to
be replaced frequently.
• Be careful when handling parts made of plastic or glass, for example be careful not
to tighten screws excessively. If such parts are damaged, injuries could be caused by
fragments, cracks, etc.
• To perform the operation safely and accurately you must use a safe, steady step or
footstool. Working without this may lead to a fall and possible injury.
• When performing the fluorescent lamp replacement, do not hold onto the Billboard
or side fitting POPs. Holding or hanging off these components may bend them out
of shape or damage them, and could lead to a fall or an accident.
PLEASE WEAR PROTECTIVE CLOTHING / EQUIPMENT WHEN CHANGING
FLUORESCENT LAMPS. PROTECTIVE GLOVES AND EYE WEAR ARE
RECOMMENDED
• Do not attempt to remove the fluorescent lamp whilst the machine is powered up.
Always disconnect the machine from the main power supply before changing the
lamp.