Sega Gungrave, User Manual

Page: 3 / 15

button
button
button
button
directional
button
left analog stick
(L3 button
when pushed down)
SELECT button
ANALOG mode button
START button
right analog stick
(R3 button
when pushed down)
DUALSHOCK®2 analog controller
The DUALSHOCK®2 analog controller will default to ANALOG mode
(mode indicator: Red) on boot-up. The vibration function can be turned
ON/OFF from the Option Screen (P.8).
L2 button
L1 button
R2 button
R1 button
DUALSHOCK®2 ANALOG CONTROLLER CONFIGURATIONS
Set up your PlayStation®2 computer entertainment system according
to the instructions in its Instruction Manual. Make sure the MAIN
POWER switch (located on the back of the console) is turned on. Press
the RESET button. When the power indicator lights up, press the open
button and the disc tray will open. Place the GUNGRAVE ™ disc on the
disc tray with the label side facing up. Press the open button again
and the disc tray will close. Attach game controllers and other
peripherals, as appropriate. Follow on-screen instructions and refer to
this manual for information on using the software.
MEMORY CARD (8MB) (for PlayStation®2)
GUNGRAVE ™ supports MEMORY CARD slot 1. To save the game in
GUNGRAVE ™, manually save and load the game data from the Main
Menu. Insertion or removal of the memory card ((8MB)
(for PlayStation®2) after switching the console on may cause data to
be overwritten or lost.
GUNGRAVE ™ is a one-player game that is played using the DUAL
SHOCK®2 analog controller. Connect the controller to be used to
controller port 1.
GETTING STARTED STARTING UP
MEMORY CARD slot 1
MEMORY CARD slot 2
USB connector
S400 i.LINK connector
controller port 1
controller port 2
disc tray
RESET button
(OPEN) button
2 3