Sega Grid 42, Owner'S Manual

Page: 67 / 148

58
EXPLANA
TION OF TEST
AND DA
TA
DISPLA
Y
9
Problem
Linked cabinets will not sync together in the attract mode.
Causes
1. Network cables are not connected.
2. The cabinets are using security keys from different regions
3. Network cables are faulty.
Solutions
1. Reconnect the network cables to each cabinet.
2. Ensure each cabinet has the same region which is viewable on the System Information page. Cabinets will only
link together from the same region.
3. Replace the faulty network cables. Contact the company from whom the unit was purchased.
Problem
Cabinets are unable to start a Multiplayer session together.
Causes
1. Network cables are not connected.
2. Cabinets have different Track Packs enabled.
3. Cabinet ID’s are not set up correctly.
Solutions
1. Ensure network cables are properly connected to the cabinets.
2. Go into Game Settings in the Test Menu and ensure each cabinet is set to the same Track Pack.
3. Go into the Network Settings and ensure each cabinet has a different Cabinet ID. Confirm the settings and then the
cabinets will reset with the new changes saved.
Problem
The Steering Wheel does not work correctly in the game.
Causes
1. The Steering Wheel has not been calibrated correctly.
Solutions
1. Go into the Calibration Settings in the Test Menu and select Calibrate Steering.
Problem
The Pedals do not work correctly in the game. Vehicles move forward or backwards with no player input.
Causes
1. The Pedals have not been calibrated correctly.
Solutions
1. Go into the Calibration Settings in the Test Menu and select Calibrate Brake and follow the on screen instructions.
Once this has been done, select Calibrate Accelerator and follow the on screen instructions.
Problem
No audio can be heard in either the attract mode, or throughout the game.
Causes
1. The audio level has not been correctly set with the Hardware Volume Control inside the cash drawer.
2. The volume levels within the Sound Settings in the Test Menu have not been set correctly.
Solutions
1. Go into the cash drawer and adjust the Hardware Volume Control until audio in the game can be heard.
2. Enter the Sound Settings menu from the Test Menu and check that all volume levels are set to the appropriate
levels. Options are available within this menu to test the volume levels of each setting to make sure each are correct.
9-3 TROUBLESHOOTING