Sega GHOST SQUAD - EVOLUTION Manual Download

Page: 67 / 133

EXPLANATION OF TEST AND DATA DISPLAY

Press the SERVICE Button and move the cursor to the item you want to select.

To clear data, move the cursor to YES (CLEAR) and then press the TEST Button. When the data has been

cleared, the message “COMPLETED” will be displayed and return to the game test mode menu screen auto-
matically.

Move the cursor to NO (CANCEL) and press the TEST Button to return to the game test mode menu screen

without clearing the data.

FIG. 9-3f BACKUP DATA CLEAR Screen

9-3f BACKUP DATA CLEAR

BACKUP DATA CLEAR

YES(CLEAR)

NO(CANCEL)

SELECT WITH SERVICE BUTTON

AND PRESS TEST BUTTON

Summary of Contents for GHOST SQUAD - EVOLUTION






































































































































Search results

Summary of Contents for GHOST SQUAD - EVOLUTION

Reviews:

Related manuals for GHOST SQUAD - EVOLUTION

Brands by name

Popular brands

Sega GHOST SQUAD - EVOLUTION, Manual

Search results

Summary of Contents for GHOST SQUAD - EVOLUTION

Reviews:

Related manuals for GHOST SQUAD - EVOLUTION

Brands by name

Popular brands