Sega CAPTO CRANE, Operating Instructions Manual

Page: 13 / 25

'('system settings
Catchtimeset:
sets the duration of the claw drop. The longer the time the longer the
length of the claw drop. Set the time range fro m 1s to 5s. default 3.5s. If you want to dig the
claw into the bed set a longer time
C2Triggering:
T his denote the point when the game changes from C1 to C2 claw strength. You
can set the option to be random ON/OFF. If you have the option set to 'OFF' it will change when the
claw reaches the top of the gantry. Random will change between the bottom of the playfield & the top
of the gantry and is determined at random points
C3 Triggering: T
his denote the point when the game changes from C2 to C3 claw strength. You
can set the option to be between 0.1-0.5 seconds. If you have the option set to 0.5 seconds the claw
strength will change from C2 to C3 0.5 seconds after it has reached the top of the gantry.
C3 Crane Test:
Auto test:
Manual Test:
Motor Set:
Let the crane cycle automatically to test the status of motor
operation
Manually control the direction of the joystick to test the
movement of the motor
Adjust the speed of the crane movement. The
higher the percentage, the faster the speed
Left Motor: Value 50%-100% Default 100% Right
Motor: Value 50%-100% Default 100%
Front Motor: Value 50%-100% Default 100% Back
Motor: Value 50%-100% Default 100%
Up/DownMoror: Value 50%-100% Default 100%
A(
Note: At any time during the automatic test, you can press 'Item' to exit.)
2.4 D Advanced Set:
GameTime Set:
Set the time given to the player to operate the crane before the crane automatically
drops the claw. After the time is adjusted, press 'Item' button to save and exit
Value 5s-120s
Coin Rate:
Sethow many coinsare required for one game. Set the parameters by pushing up/down on
the joystick. Press 'Item'button to save and exit. Value 1-99
Grab At On ce:
This allows the player to press the grab button while the claw is descending
to close the claw at this point. This stops the claw from digging into the
prize bed Value Enable/Disable
PWD Set :
System password setting. Push up/down on the joystick to change the setting. Press 'Item'
button to save and exit. Value 0-9, Default 0000.
Time Set:
System time setting. Push up/ down on the joystick to change the setting. Press 'Item'
button to save and exit
6