Sega Airline Pilots, Owner'S Manual

Page: 44 / 97

In order to prevent electric shock and short circuit, be sure to turn off the power
before performing work on the interior parts of the product.
Be careful not to damage wiring. Damaged wiring can cause electric shock or short
circuit.
Do not touch places other than those specified. Touching unspecified places can
cause an electric shock or short circuit.
10. PEDAL UNIT
In the TEST mode, if the value movements of the CONTROL WHEEL are irregular, adjust or replace the
Volume in accordance with the following procedure:
10 - 1 ADJUSTING THE VOLUME
Take out the 4 screws and remove the
Pedal Mechanism Cover.
Loosen the 2 screws securing each Volume
Bracket and move the Volume Brackets.
Move the Volume Bracket to disengage
gear mesh. Move the Volume Shaft in the
manner so that the cut portion of the
Volume Shaft faces opposite the center of
the ADJUST GEAR.
Engage the gears and fasten the 2 screws.
Carefully move the Pedal forward &
backward and check to ensure that the
Volume range is not exceeded.
Upon completion of adjustment, be sure to
perform Volume setting in the TEST mode.
1
2
3
4
5
6