Sega Airline Pilots, Owner'S Manual, Page: 54 / 97

15. TROUBLESHOOTING
PROBLEMS CAUSE COUNTERMEASURES
When Main SW is The power is not on. Firmly insert the plug into the outlet.
ON, there is no
activation.
Power supply/voltage is incorrect. Make sure that the power supply/voltage
is correct.
AC main fuse causes the power to be Check the fuse. Remove the cause of
cut off due to momentary overload. overload and replace the fuse.
Irregular sound Greasing to gear mesh portion is not Apply greasing or eliminate extraneous
emitted from satisfactory, or extraneous matter matter.
inside Rear Cabinet mixed in.
No sound is emitted. Sound Volume adjustment is not Adjust the SWITCH UNIT’s speaker
correct. volume.
Sound BD and Amp are Perform SOUND TEST to find and
malfunctioning. replace defective parts.
No sound from In correct Cabinet Type Setting. Correct Cabinet Type Setting.
Cockpit.
The Fluorescent The Fluorescent tube is burnt out. Replace the Fluorescent tube.
lamp does not
light up.
The image coloring Affected by C.R.T. magnetization. Press the DEMAG. SW on the SWITCH
on the MONITOR UNIT.
is incorrect. Incorrect monitor adjustment. Make appropriate adjustments.
Operation of Deviation of Volume. Adjust Volume value in the TEST mode.
CONTROL WHEEL,
RUDDER PEDAL,
Volume malfunctioning. Replace the Volume.
and THRUST LEVER
is not satisfactory.
ADJUST GEAR mesh is incorrect. Adjust ADJUST GEAR mesh.
Should trouble occur, first check wiring connections.
CIRCUIT PROTECTOR
Functions due to the activation of bimetal. To restore the function, wait approximately one minute
or longer until the bimetal cools off, and press the button.