8
v i d e o r e c o r d e r
Setting up the
Getting started
1 Unplug the aerial cable from the back of your television and plug it into the ANT IN socket
on the back of your video recorder.
2 Plug one end of the aerial cable provided into the aerial socket on your television. The
cable only fits one way round, so look at the ends to see which one matches the television
aerial socket. Plug the other end of the cable into the ANT OUT socket on the back of the
video recorder.
3 Plug the moulded mains plug on the end of the mains cable into the mains socket on your
wall and switch on the power (if there is a power switch).
4 Switch your television on and select the programme number that you have chosen for the
video channel (see the instruction book for your television).
5 Press the POWER button once on the video recorder (the display
will get brighter).
6 Tune the television in the UHF waveband until a picture like the
one below appears, and memorise it under the video
programme number. (Please read the instruction book for
your television to see how to do this.)
7 Switch your video recorder off by pressing the POWER button
again.
AUTO SEARCH!
OK:CONFIRM MENU:END
◆
If you cannot get a clear picture, please read ‘What to do if you get picture interference’ on
page 12.
◆
If you don’t see the picture in step 6, put a pre-recorded video cassette in the video recorder at
step 6 and try again. Pre-recorded video cassettes that you buy or hire automatically play when
you put them into the video recorder, so the picture that appears on your television will be the
picture from the video cassette. We have described how to load a video cassette on page 22.
For televisions without a Scart socket
EURO AV
ANT
.
OUT
ANT
.
IN
Mains cable
Aerial cable
(provided)
Aerial
cable
