30
R E C O R D I N G
Recording from other equipment
◆
Select the video channel on your television so you can monitor the recording.
Recording through the aerial cable
Please read ‘Connecting extra equipment - Through the aerial cable’ on page 11. Press the
PR+ or PR- button to select the video recorder programme number that you have tuned to that
piece of equipment, then record as usual.
Recording through the scart cable
If the equipment is connected with a scart cable, press the AV button on the remote control
to make ‘AU’ appear in the video recorder display panel. After a few seconds, ‘AU’ will
change to either the time or the tape counter, depending on whether or not you selected the
tape counter with the information display button
. You can check again that you have
selected the AV channel by using the information display button (please see ‘On-screen
information display’ on page 26).
Change back to programme numbers by pressing the AV button until a ‘PR’ number appears
briefly in the video recorder display.
Recording through the front input sockets
Camcorders and similar equipment can be connected to the front AV (audio / video) input
sockets of the video recorder. Press the AV button on the remote control twice until ‘AU F’
appears in the video recorder display panel. After a few seconds, ‘AU F’ changes to either the
time or the tape counter, depending on whether or not you selected the tape counter with the
information display button. You can check again that you have selected the AV channel by
using the information display button (please see ‘On-screen information display’ on page 26).
Change back to programme numbers by pressing the AV button until a ‘PR’ number appears
briefly in the video recorder display.
•
‘AU’ on the video recorder display appears as ‘AV’ on the television picture.
Protecting cassettes from being recorded over
Please see page 21.