10
TB MRI(K)3-C 03.02 E
3.4
Front plates (for ER/XR-relay types)
Figure 3.9: Front plate MRI(K)3-ICER
Figure 3.10: Front plate MRI3-ICER
The LEDs I
P
, I
Q
, RS and FR on the
MRIK3-ICE
and
MRI3-ICE
emit a yellow light, all other LEDs are bi-
coloured. The LEDs at the left next to the alphanumeri-
cal display give a green light during measuring and a
red one when a fault signal occurs.
The LEDs underneath the <SELECT/RESET> - push but-
ton emit a green light during adjustment and inquiry of
the setting quantities left to the LEDs. They show a red
light if the printed setting quantities right to the LEDs
are activated.
3.4.1 Indicating LEDs
L1, L2, L3
Indication of the phase currents
E
Indication of the earth current
I
P
Indication of the active component of
the earth fault current
I
Q
Indication of the reactive component
of the earth fault current.
!
Date and time
CB red
CB ist switched on
CB green
CB is switched off
CB blinking
CB has faults
3.4.2 Adjusting LEDs
I>
Overcurrent setting
I>>
Short-circuit setting
IE>
Earth overcurrent setting
IE>>
Earth short circuit setting
CHAR
Selection of characteristics
t>
lights in combination with all time de-
lay settings.
DI
Assignment of the input functions to
the digital inpus
Trip
ext. tripping
Block
Trip/Blockage-time
Fast
Fast/Time function
SHOT
Number of AR shots
tF
max. fault time
tD1
dead time before 1. AR
tD2
dead time before 2. AR
tD3
dead time before 3. AR
tD4
dead time before 4. AR
tCl
max close impuls time
tR
reclaim time
FR
Parameter for the fault recorder
RS
Setting of the relay address
P2
Parameterset 2 ist active
