Seg KM 1025, Instruction Manual, Page: 41 / 56

41
6. Place the fi lter cover (1) onto the fi lter insert (3).
7. Close the swing-out fi lter (5).
8. Fill the coff ee pot (6) with cold water up to the mark ‘12’.
9. Open the lid of the water tank (13) and pour the water into the water tank (12).
10. Close the lid of the water tank (13)
11. Place the coff ee pot (6) onto the hot plate (8).
12. Connect the device with the power supply.
13. Press the button ‘MAHLWERK AUS’ (18). The LED light next to the button lights up
and confi rms that the grinder is turned off .
14. Press the On/Off button (20) to start the device. The LED light next to the button
lights up and confi rms the operation mode.
15. Let the heated water fl ow into the coff ee pot (6) until the water tank (12) is empty and
the LED lamp next to the On/Off button (20) goes out.
16. Empty the coff ee pot (6).
17. Repeat the procedure 2–3 times to clean the device and its equipment thoroughly.
18. Press the On/Off button (20) to switch off the hot plate (8).
19. Empty and clean the coff ee pot (6).
Set time
1. Connect the device to the power supply. The fl ashing LCD display shows ‘12: 00’.
2. Repeatingly press the ‘HOUR’ button (22) and then ‘MINUTE’ (23) to set the
current time.
NOTE!
If the time is not set the automatic start function cannot be activated.