Seg Florenz 55, Operating Instructions Manual

Page: 56 / 111

26
Waste Electrical Recycling
Correct disposal of Product
This sign indicates that this product may not
be disposed of with your regular household
waste. The recycling and separate collection
of such products is your responsibility. Please
drop off the above mentioned waste at a
designated place for recycling waste electri-
cal and electronic equipment. If you do not know where
to drop off your waste equipment for recycling, please
contact your loc
ce or household waste collec-
tion service.
The crossed out wheeled dust bin symbol
indicates that batteries and /or accumulators
must be collected and disposed of separately
from household waste.
If the battery or accumulator contains more
values of lead (Pb), mercury
(Hg), and/or c -
tery Directive (2006/66/EC), then the chemicals
Hg Cd Pb symbols for lead(Pb), mercury (Hg)
and/or cadmium (Cd) will appear below the
crossed out wheeled dust bin symbol.
rate collection of batteries, you
will help to assure the proper disposal of products and
batteries thus help to prevent potential negative conse-
quences for the environment and human health.
For more detailed information about the collection and
recycling programmes available in your country, please
contact your loc
ce or the shop where you pur-
chased this product.
This appliance complies with European
Safety and Electrical directives.
following EU regulations:
En55013:2001+A1:2003+A2:2006
EN55020: 2007
EN61000-3-2: 2006 EN61000-3-3:1995+A1:2001+A2:2005
EN55022:2006(CLASS-A)
EN55024:1998+A1:2001+A2:2003
Manufacturer:
Schmid Electronics GmbH
In Dürrfeldslach 3
D-66780 Rehlingen-Siersburg (Germany)
Fon: +49(0)6835 92350-0
Fax: +49(0)6835 92350-500
Wall Mounting
1. The stand mus rst be removed. Place the TV face
down.
2. Remove the four screws at the bottom underneath
the stand. Press the retaining clip s forward to release
the base of the stand. Remove the one screw inside of
the trunk of the stand still attached to the TV. Remove
the three screws on the back of the TV to release the
remaining part of the stand.
3. Remove and store the stand and screws.
4. Use four machine screws to mount the TV on the
bracket.
This unit is VESA-Compliant and designed to be wall
mounted with a VESA-Compliant 100mm x 100 mm
mounting kit. Mount this unit according to the instruc-
tions of the wall bracket (not supplied)
100mm
100mm
4 Mounting holes Screw size M4 x 10
Florenz 55 cm (21,5”) LCD-TV
down to release