Seg Florenz 55, Operating Instructions Manual

Page: 46 / 111

16
TV SETTINGS Menu
All options mentioned on the previous page can also be
accessed through the Main Menu system in the TV Set-
tings menu.
To access the correct service you need the TV to be in the
correct mode, ATV, DVB or Cable.
Select the desired signal source either from the handset
or from the source menu.
Signal Source
Press the Source button on the remote control or the TV/
AV button on your LED TV to select the signal source.
Press the buttons to highlight the desired signal
source. Press OK to select it.
After you have selected the desired operating mode,
press the Menu button on the remote control to display
the “TV Settings“ menu.
When you are in the correct mode, press Menu button on
the remote control and enter the TV Settings Menu
To select the TV mode directly from the remote control
use the 3 mode keys
Press MENU button to display the main menu, use
left/right buttons to select EINSTELLUNGEN menu, press
OK or down button to enter the menu. Press MENU or up
button to return to the main menu.
NOTE: TV SETTINGS can only be selected under the ATV/
DVB/CABLE modes, it is disabled whilst in all other
modes.
ATV / CABLE SETTINGS
DVB / DVB-T SETTINGS
DIGITAL CABLE (DVBC) SETTINGS
Auto Scan
In the Auto Scan menu there are 3 options for you to se-
lect from: DVB Select type, Country and Tune Type.
Florenz 55 cm (21,5”) LCD-TV