Seg Florenz 55, Operating Instructions Manual

Page: 47 / 111

17
EN
DTV (DVBT) Manual Tuning
You can manually tune DTV channels in the TV SETTINGS
menu. Press the Left/Right arrow buttons to select the
channel you wish to tune, then press OK button to scan
for the channel.
You can manually tune CADTV channels in the TV SET-
TINGS menu.
Note: for more information about the channel parameters
(frequency, symbol rate and QAM type), please check with
your cable TV provider.
Frequency
Select Frequency using the buttons.
Symbol (ks/s)
Select the Symbol (ks/s) using the buttons.
QAM Type
Select the QAM Type using the buttons
ATV (analogue cable TV) Manual Tuning
You can manually tune ATV channels in the TV SETTINGS
menu.
Storage to
Press the buttons to change the numbered location
of the found channel.
System
Select the system using the buttons.
Current CH
Displays the current channel number, press the buttons
to choose the channel you wish to modify.
Search
Press the buttons to scan through the frequencies to
ew channels.
Fine tune
In case of bad reception, you can press the buttons to
mak stments to the tuning. After manual tun-
ing is complete, please press the RED button to save any
found channels.
Press / to select DVB Select type, Country and Tune
Type, press OK to start scanning.
If you select ATV+D rst 50% of the processing is
for ATV tuning, while the second 50% represent DTV tun-
ing. When ATV tuning, you can press MENU to Skip ATV
tuning and start DTV tuning or press EXIT to exit tuning.
During the channel search a preview of the already-found
channels is displayed.
CADTV (DVB-C) Manual Tuning
Florenz 55 cm (21,5”) LCD-TV