SEQUENCER WITH
DIFFERENTIAL PRESSURE
SWITCH
Technical brochure
FI 72.0452.0617E
Page 6 / 25
PROTECTION :
Protection fuse of SV outputs is reachable after dismounting the connections cover.
(see table 1 for the calibre of the fuse).
VOLTAGE CHOICE :
It is possible according to the version of the sequencer to set differently the supply voltage and the solenoid valves
voltage of that made by default in factory answering the ordered version.
warning: the device must be switched off.
Remarks:
-
The supply choices "115V / 230V" or "24 / 48V" can be made only with order
-
If supply voltage "115V / 230V", the voltage choice of solenoid valves " 24V or 48V " can be made only with
order
See on the following table the possible regulations according to the version of the box.
ACCORDING TO THE SUPPLY
VOLTAGE / SOLENOID
VALVES VOLTAGE VERSION
POSITION OF THE JUMPERS :
230VAC / 230VAC
48VAC / 48VAC
Fuse F1 et F2 :
General protection
of the device
Fuse F3 :
Protection of outputs
solenoid valves
Jumper on :
S2 / S3 / S4
Nothing on :
S1 / S5 / S6
