6
Description
PolyLink kit
PolyLink effort/position kit: integrates the position sensor and allows acquisition and transfer of
signals
of
respiratory effort and of body position to the PolyLink module for S.Box. It is powered by an
internal battery and fits into a support.
Figure 2 – Views of the PolyLink effort/position kit alone and in its support
④
indicates how the PolyLink effort/position kit must be placed in its support.
⑤
indicates where the Thorax effort sensor must be connected (blue colour).
⑥
indicates where the Abdomen effort sensor must be connected (yellow colour).
⑦
indicates where to plug the USB power cord of the charger used to charge the internal
battery of the PolyLink effort/position kit.
⑧
indicates the charge state of the internal battery.
⑨
indicates the positions "On" (right) and "Off" (left) of the switch on the PolyLink effort /
position kit.
⑩
support in which the PolyLink effort/position kit must be inserted. It is used to position and
maintain the effort sensor on the thorax belt and to store the surplus cables.
⑪
sliding door: depending on its position, you can either switch on / switch off or charge the
PolyLink effort / position kit, or plug the respiratory effort sensors in.
Respiratory effort sensors: are delivered with their belts and allow the measurement of thoracic and
abdominal respiratory efforts. Each sensor must be connected to the PolyLink effort/position kit via a
cable terminated with a colour connector (blue or yellow). Read the user manuals before installing the
sensors.
If you are using a pulse oximeter WristOx2 in addition to the PolyLink kit, refer to the corresponding
user instructions for the overview and installation of this equipment.
⑩
⑪
⑤
⑥
⑦
⑧
⑨
④
