12
Use
PolyLink kit
Tap
to exit the status menu.
The adjustment of thorax and abdomen effort belts can be performed using SEFAM Access.
Select the icon
on your Smartphone or on your tablet to run the application "SEFAM Access"
and follow the instructions on the screen.
If you are using a pulse oximeter WristOx2 in addition to the PolyLink kit, refer to the settings menu in
the S.Box patient manual to pair the oximeter with the device.
Real-time acquisition
The PolyLink kit allows acquiring in real time the signals of respiratory efforts and of body position.
Hold down the start / standby button
to begin treatment. The compliance data stored in the
machine is saved on the SD memory card. Then the acquisition of the signals from the PolyLink kit
and from the pulse oximeter WristOx2 begins, if present.
CAUTION
Make sure that the SD card is inserted in the S.Box device for the real-time acquisition.
Check that the symbol
is present in the center of the display, showing that the BLE wireless
communication is enabled.
Do not unplug the S.Box device.
Once the S.Box comes back to standby, the polygraphic control is complete: the SD memory card can
be removed from the S.Box device.
The data saved on the SD memory card can be retrieved by the Health Professional for later analysis
with the SEFAM Analyze software.
Stopping treatment
1.
With a thin tip like that of a pen, turn off the PolyLink effort/position kit by setting the switch to
OFF (sliding door to left) and check that the LED is off.
2.
Hold down the start / standby button
of the S.Box device to stop the treatment.
Transport of the PolyLink kit
Unplug the S.Box device and uninstall the PolyLink kit by following the instructions of paragraph
"Removal of the PolyLink " page 13.
Pack the elements of the PolyLink kit in the transport bag.
