34
Material Disinfection
DreamStar Duo, DuoST
Material Disinfection
Refer to the instructions for use of the chemicals used to respect dilutions and quantities of products,
contact time, wearing of personal protective equipment.
Surface disinfection of the device
Disinfection of the outside of the machine is carried out using disinfectant detergent product.
If using spray or disinfectant detergent foam:
o
Pulverize the product on a single use non-woven support.
o
Wipe the outside of the device with this support and let dry.
If using disinfectant detergent towels:
o
Wipe the outside of the device and let dry.
Water chamber disinfection procedure (if included)
Disassemble the chamber completely.
Pre-disinfection:
o
Completely immerse the parts of the chamber in the pre-disinfecting solution diluted
according to the instructions recommended by the pre-disinfecting product manufacturer.
o
Also, follow the recommended soaking time and if necessary, brush using a soft brush.
o
Rinse all the parts of the chamber thoroughly and copiously with running water.
Cleaning:
o
Prepare a dip tank containing water and a mild detergent (for example using 5 to 10 ml of
dishwashing liquid diluted in 5 l of water).
o
Clean the chamber parts in the detergent solution, and if necessary, brush using a soft
brush
o
Rinse the different parts of the chamber thoroughly and copiously with running water.
o
Remove excess water by shaking slightly.
Disinfection:
o
Prepare a new dip tank containing water and a disinfecting product.
o
Follow the same steps as the pre-disinfection.
Drying:
o
Allow to dry naturally.
Storage:
o
Reassemble the water chamber.
o
Keep the disinfected and dried water chamber in a single use clean bag, sealed until a new
use.
Note:
Discard the water chamber if showing any damage and replace it with a new one.
