SeeTech iHunter 2.0 CIS/FIT, Service Manual

Page: 41 / 162

SERVICE MANUAL iHunter Series
- 41 -
♣ Description of serial port
▶
Refer to 4-3. Serial interface Specification to know serial cable construction.
♣ How to set the Serial Printer
▲ /+10
Press and hold down ▲ /+10
key
M i x R J P C F
- - - - - - - - - - - - - - - - - - - - - - - -
0 4 8
$
1 , 2 0 7
- - - - - - - - - - - - - - - - - - - - - - - -
B 1 0 0 S 1 0 0 0 A D D
+10 -> USER MENU
PRINT -> PRINT MENU
Press PRINT key to enter Serial
Printer Mode.
PRINT
MODE
If you want to select the menu, press
MODE key.
If you want to select the value,
Press
PRINT , ▲ /+10 or
▼
/+1 key
PRINT
SERIAL PRINTER MENU (1/2)
------------------------------
>>1.EXIT(PRESS RESTART KEY)
2.Find SERIAL PRINTER
3.How to print --------*Manual
4.Print out Type ------*Receipt
5.Blank of tail ------- *5
------------------------------
NEXT HELP – CF KEY
▼ /+1 ▲ /+10
or
SERIAL PRINTER MENU (1/2)
------------------------------
1.EXIT(PRESS RESTART KEY)
2.Find SERIAL PRINTER
>>3.How to print --------*Manual
4.Print out Type ------*Receipt
5.Blank of tail ------- *5
------------------------------
NEXT HELP – CF KEY
If you changes a setting value, the LCD Display will display the message as below during
saving the setting value.
- - - - - - - - - - - - - - - - - - - -
| Pl ea se W ait .. .. .. .. |
| Se tt in g Dat a S av in g .. ... .|
- - - - - - - - - - - - - - - - - - - -
There are two types of interface.
1. SPI (Serial Peripheral Interface)
- for Upgrade
- PIN1: GND
- PIN2, 3, 4, 5, 6, 7, 9, 10, 11, 13,
14, 15: for SPI
2. RS232C
- for PC communication
- for serial printer
- for other devices with RS232C
- PIN1: GND
- PIN12: TXD
- PIN8: RXD