59
2. QoS Rule settings
The following table describes the labels in this part.
Label
Description
IP Address
Enter source/destination IP Address in dotted decimal
notation.
Netmask
Once the source/destination IP Address is entered, the
subnet mask address must be filled in this field.
MAC Address
Enter source/destination MAC Address.
Port / range
You can enter specific port number or port range of the
source/destination
Protocol
Select a protocol from the drop down list box. Choose
TCP/UDP
,
TCP
or
UDP
.
Bandwidth Priority
Select a bandwidth priority from the drop down list box.
Choose
Low
,
Medium
or
High
.
Filter Priority
Select a filter priority number from the drop down list
box.
Lower number gets higher priority
while two
rules have the same bandwidth priority.
IP TOS Match
Select an IP
type-of-service
value from the drop down
list box. Choose Normal Service, Minimize Cost,
Maximize Reliability, Maximize Throughput, or
Minimize Delay.
