32
Ausgabe
issue
E / 19.02.2013
Dokument
document
OM.MAI.06e
Blatt
sheet
6 (6)
9
Dismantling / Reassembly
9.1.3.6 Pressure branch (700) - Reassembly
Tool (
W2
/chain wrench)
Moisten outer surface of the rotor
(600)
with lubricant
(GM)
.
Moisten inner surface of the stator
(601)
with lubricant
(GM)
.
Prop up stator
(601)
with support
(S)
.
Turn stator
(601)
in the “right” rotating
direction and slide onto rotor
(600)
.
–
Use tool
(W2)
.
Remove tool
(WS)
.
Slide in plug-in shaft pin
(309)
.
Pay attention to the position of the splash
ring
(310)
.
Insert the splash ring collar at a distance of
0.5 mm from the lantern
(200)
.
Prop up stator
(601)
with a support
(S)
.
Insert tie bolts
(602)
loosely into the feed
hopper
(500)
.
Push pressure branch
(700)
on to the
stator
(601)
.
Insert tie bolts
(602)
loosely in the
pressure branch
(700)
.
Remove the support
(S)
.
Mount screw fitting
(604, 606)
.
Tighten tie bolts
(602)
equally.