28
Ausgabe
issue
E / 19.02.2013
Dokument
document
OM.MAI.06e
Blatt
sheet
2 (6)
9
Dismantling / Reassembly
9.1.2.2 Stator (601) - Dismantling
9.1.2.3 Feed hopper (500) - Dismantling
9.1.2.4 Rotating unit (RTE) - Dismantling
with flush connection
Raise/move splash ring
(310)
.
Remove the plug-in shaft pin
(309)
.
Insert tool
(WS)
.
Turn tool
(WS)
upwards.
Tool (
W2
/chain wrench)
Add lubricant
(GM)
to the opening on
pressure branch side between the rotor
(600)
and the stator
(601)
.
Turn the stator
(601)
in the “leftt” rotating
direction and remove.
–
Use tool
(W2)
.
Prop up the rotor
(600)
with support
(S)
.
Put a protective cover
(SH)
on the rotor
(600)
.
Prop up rotor
(600)
with a support
(S)
.
Remove screw fitting
(507, 509)
.
Remove feed hopper
(500)
and casing
gasket
(501)
.
Remove tool
(WS)
.
Tool (
W10
/dismantling tool)
Tool (
W9
/mounting lever)
Remove the flush connection
(SSÜ)
on the
shaft seal casing
(SEA)
.
