4 Channel
Network Video Recorder
User
’s Manual
English
10
Connect to the NVR
There are various ways you can connect to the NVR and below are
the suggested methods for different network setup:
•
The NVR is placed in a network with a DHCP server: Connect to
the NVR by using
“NVR Search” Utility
•
The NVR is placed in a network without DHCP server (or you are
connecting to it directly):
Access NVR with its default IP
Use NVR Search Utility
To begin, launch the “NVR Search” utility from the CD and proceed
with the installation:
If the NVR is placed in a corporate network or a local area network
where a DHCP server is already presented, run the “NVR Device
Search” utility from a computer that is on the same network (within
the same subnet) and locate the NVR with its IP address that is as-
signed by the top-level DHCP server.
