10
|
MAGIQ TOUCH CONTROLLER INSTALLATION MANUAL
|
11
The controller will scan to find the component (cooler/heater).
When it has been identified, continue to the operating screen.
MULTIPLE COMPONENT INSTALLATIONS
The Controller uses a ‘System Installation Wizard’ to assist
with the installation process.
The first part of the wizard requires the installer to specify the
type and number of components that will be installed in the
system. This step is important because the Controller needs
components to be connected and powered up
one at a time
and
in the correct order.
Note!
It is important that components (e.g. heaters, coolers,
sensors etc.) are connected
ONE AT A TIME
as prompted by the
Controller. If more than one component of the same device type
is connected at the same time there is a risk of communication
corruption and the system will not function correctly!
The system installation is complete once all components have
been detected.
CONNECTING THE CONTROLLER
cont
Skip now to the ‘OPERATION SCREENS’ chapter.
ILL1612-A
Select primary mode (COOL/HEAT/FAN ONLY):
OPERATION SCREENS
Turn system on & off:
Adjust temperature:
ILL1613-A
ILL1614-A
ILL1615-A
