OWNER’S MANUAL
|
ON
OFF
HEATER
SWING
SHIFT
+
-
2
1. Control panel
2. Display Panel
3. Front Grille
4. Handle
5.
Air inlet grille & filter
6. Power Isolation Switch
7. Base (Locking nut not shown)
8. Remote control
ASSEMBLY
COMPONENTS LIST
REMOTE
When the heater power is on, the remote
control can be used to operate the heater from
up to 4m away.
If there are two or more heaters within this
distance all will be operated by the same
remote control.
Replacing the battery
Release battery slide by pressing on the tab at
the bottom of the remote. Remove the battery
and replace with an equivalent CR2032 type
battery.
Note: Your remote control will be supplied with
a battery.
1
2
3
4
5
6
7
ASSEMBLY
Unpack the heater and check that you have all
of the components.
Turn the heater upside down and remove the
plastic Locking nut. Assemble the Base onto
the heater and fix into position with the Locking
nut.
Note: Ensure the nut is tight to avoid shaking
of the heater.
8
