BREEZAIR EXQ/EXS/EXVQ EVAPORATIVE COOLER OWNER’S MANUAL
|
1
Hello and congratulations on
purchasing a Seeley evaporative
cooler
Refer to the Owner’s Manual supplied with the
controller for operating instructions.
ILL1582-C
Your MagIQtouch Controller contains a settings
menu, which gives you access to information
about your evaporative cooler and to extra
functions including:
About Appliance
Access information about the appliances
installed in your system.
Min/Max Set Temperature
You can change the minimum and maximum
temperature displayed on your slider,
depending on what temperature range you
prefer your system to work within.
Night Quiet Mode
Restrict fan speed over the night time period
for a quiet night’s sleep.
Manual Drain
This will turn the cooler off and drain the tank.
Pad Flush
This will turn the cooler off and run the pumps
for a specified time. Use this feature to flush
the cooler pads.
Drain and Dry
This option allows you to nominate a time each
day when the cooler will drain the tank and run
the fan for 1 hour.
Autoclean
Select the preferred cleaning interval (50 / 100
/ 200 hrs). At 8.00am after the selected running
hours has been reached, the cooler will drain
the tank, fill with fresh water and operate the
pump for 5 minutes. When complete, drains
the tank and returns to previous operation
mode.
External Sensor
EXS models are fitted with an external air
sensor. When switched on, it displays a live
external ambient temperature reading on the
wall controller. A desired external temperature
set point can be programmed to turn off the
pump conserving water usage and reducing
humidity while the cooler is running. In addition
where climate conditions are close to freezing,
an external temperature set point can be
programmed to auto drain the tank and prevent
freezing conditions damaging the tank.
Note!
There are some settings, which are
locked and are only for installers or service
technicians.
At Seeley International we manufacture
Breezair
®
evaporative coolers from the highest
quality materials, and we have designed the
product to provide many years of economical,
trouble-free cooling.
OPERATING YOUR COOLER
To provide efficient cooling or ventilation the
building must have sufficient exhaust openings
to the outside of the building. To assist air flow,
open windows and doors that are farthest from
the outlet vent in each room. In these rooms,
provide an exhaust opening about 2 times the
vent size of the room.
Where the design of the building prevents
adequate exhaust, consideration should
be given to the provision of mechanical
extractions, such as an exhaust fan.
There are three main ways that an evaporative
cooler can operate to provide cooling comfort.
• The cooler can be set at a constant fan
speed, without reference to the current
temperature.
• The cooler can be given a temperature
target, in which case it will vary the fan
speed in order to get as close to the
target as possible. (
Note!
Humid weather
conditions may limit what temperatures can
be achieved.)
• The cooler can be set to a fan only mode,
providing air circulation only.
MAGIQTOUCH CONTROLLER
OPERATION
Summary of Contents for Breezair EXQ
Page 15: ......
