9
SEELEY INTERNATIONAL
- OWNER’S MANUAL
SEELEY INTERNATIONAL –
OWNER’S MANUAL
9
OPERATION cont.
LIGHT
8°C HEATING FUNCTION
Press the LIGHT button to toggle
between LIGHT ON and LIGHT OFF
status. Default is LIGHT ‘ON’.
When in COOL mode, press the TEMP
and CLOCK buttons simultaneously to
start Energy Saving function. The
remote controller display will show the
‘SE’ icon. Repeat to cancel.
When in HEAT mode, press the TEMP
and CLOCK buttons simultaneously to
start 8°C Heating function. The
remote display will show
and a
selected temperature of ‘8°C’ (46°F).
Repeat to cancel.
ENERGY SAVING
SLEEP cont.
d) If SET between 28-30°C, SET
temperature will decrease by 1°C for 3
hours, then will continue to run at this
temperature.
LOCK
The remote controller can be locked
from inadvertent button operation.
Press both ▲or ▼buttons
simultaneously to lock (or unlock) the
remote controller. The lock icon will
be displayed, and will flicker when a
button is pressed.
FAHRENHEIT / CENTIGRADE
The temperature display can be
toggled between Centigrade and
Fahrenheit scales by pressing the
MODE and ▼ buttons simultaneously.
ENERGY SAVING
When in COOL mode, press the TEMP
and CLOCK buttons simultaneously to
start Energy Saving function. The
remote controller display will show the
‘SE’ icon. Repeat to cancel.
8°C HEATING FUNCTION
When in HEAT mode, press the TEMP
and CLOCK buttons simultaneously to
start 8°C Heating function. The
remote display will show and a
selected temperature of ‘8°C’ (46°F).
Repeat to cancel.
WiFi FUNCTION
Press the WiFi to toggle WiFi function
on or off. The “WiFi” icon will appear
on the remote control display when in
use.
To restore factory default settings on
the WiFi module, press “MODE” and
“WiFi” buttons simultaneously for 1s
when the unit is OFF.
SLEEP 3: this is a User programmable
curve, created as follows:-
a) When in SLEEP 3 mode, hold the
TURBO button down until the remote
displays ‘1 hour’ and the SET
temperature will display.
b) Adjust the SET temperature, then
press TURBO button to confirm.
c) The remote display will move to the
next time setting (’2 hours’, ‘3 hours’ or
‘8 hours’), and the SET temperature
can agin be programmed.
d) Repeat until the ‘8 hours’ SET
temperature has been entered. Once
completed, the remote display will
show the original settings.
The SLEEP 3 settings will be stored
and can be reviewed at any time in the
SLEEP 3 mode by pressing the
TURBO button and scrolling through
without adjusting the settings.
Review mode will be quit if no button is
pressed within 10 seconds, or if the
ON/OFF, MODE, TIMER or SLEEP
buttons are pressed.
OPERATION cont.
