®
1
CPL LCB BM Evaporative Cooler
Introduction
Wall Control Functions
Drain Valve & Bleed System
Maintenance
Service Checklist
Troubleshooting
7
9
6
3
2
10
®
INTRODUCTION
Cooler Models
Exhaust
Opening
2.0m
2
LCB250 BM500 CPL450
CPL700
CPL850
CPL1100
BM750
BM900
BM1150
LCB350
LCB450
LCB550
2.5m
2
3.0m
2
4.0m
2
2
SEELEY INTERNATIONAL –
OWNER’S MANUAL
Congratulations on choosing a new Seeley
International cooler for your home.
Your cooler is built from the highest quality
materials and engineered to provide many years
of economical, trouble free cooling.
Please take a few minutes to read these
instructions so you have a full understanding of
how to operate your cooler. Your installer should
demonstrate the features and procedures set out
in these instructions. The installer should also
provide you with a Model and Serial number,
which can be filled out on the last page.
Keep these instructions in a safe place for
future reference.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Effective cooling
To provide efficient cooling or ventilation the
building must have sufficient exhaust openings
to outdoors in the form of doors, windows or
other vents. To assist air circulation, open
windows or doors that are furthest from the
outlet vent in each room. In every room that has
an outlet vent, provide an exhaust opening about
2 or 2.5 times the vent size of the room. Where
the design of the building prevents adequate
exhaust, consideration should be given to the
provision of mechanical extraction such as an
exhaust fan.
Total minimum openings for the whole building
are demonstrated by the following table:
Please note that an average size door is 1.5m
2
