SeeEyes SC-IPR3001E, User Manual

Page: 8 / 16

Release Version 1.8
7
5. Connection Diagram
5-1. In case of connecting PoE IP Camera (PoE Switch ON)
5-2. In case of connecting SC-IPR1208EH (8CH Receiver) (PoE Switch ON)
<Installation Guide>
① Set CAMERA PoE switch as ON from SC-IPT3001E(Transmitter). (PoE LED On)
※ In case of connecting non PoE camera, set CAMERA PoE switch as OFF from Transmitter.
② After connecting IP CAMERA to Transmitter, connect coaxial cable connected to SC-IPR3001E(Receiver).
③ Connect coaxial cable connected to Transmitter to Receiver. Connect Receiver to NVR or PoE Hub.
④ Input power to Receiver by connecting DC power adapter (48V or 56V).
⑤ Press FUNC button about 3 seconds and wait about 1 minute for communication between Transmitter
and Receiver.
⑥ Check the camera’s video from the monitor connected to NVR. (LINK LED On, ETH LED Flashing)
Set CAMERA PoE switch on Transmitter as OFF
Press FUNC button on Receiver about 3 seconds and wait about 1 minute.
①
②
③
④
⑤
⑥
or
Transmitter)
Receiver)
Coaxial Cable
(RG-6)