Release Version 1.0
9
7. Specifications
Model No.
SC-IPH3002DC
Power
Input
DC Power
DC 48V
또는
DC 56V Adaptor
PoE Power
PoE IEEE 802.3af / 802.3at, Endspan / Midspan (Mode A / Mode B)
Feature
Power input DC Adaptor and DC Adapter power supply priority
among PoE
PoE Output
CAMERA PORT
Max 30W, Standard PoE Support, IEEE802.3 af/at Mode A
Power Consumption
Max 1W (No-load Condition)
Max. Transmission Distance
When setting 100Mbps: Max. based on CAT.5e. 100m
When setting 10Mbps: Max. 250m
Connection
Port
NVR PORT
RJ-45 1Port (
TIA/EIA568B Type)
CAMERA PORT
RJ-45 1Port (
TIA/EIA568B Type)
POWER
DC JACK
RJ-45 Connector
Pin Assignment(Polarity)
1Pin: TX(+), PWR(+) 2Pin: TX(-), PWR(+)
3Pin: RX(+), PWR(-) 6Pin: RX(-), PWR(-)
LED
Indicator
Camera
Side
Yellow
On for PoE output
Green
Camera Port Data Link
시
Blink
NVR
Side
Yellow
On for PoE input
Green
NVR Port Data Link
시
Blink
Slide switch
change the transmission bandwidth (100Mbps , 10Mbps)
Transmission Bandwidth
10/100Mbps support (
Full duplex)
Operating Temperature /
Operating Humidity
-10
°
C ~ +50
°
C / 0 ~ 80%
Material / Weight
aluminum / 104g
Dimensions
77(W) x 60(H) x 25(D)mm
※
Using a LAN cable extension gender (coupler) causes signal attenuation. The use of multiple
extended gender connections is not recommended.
※
Cable transmission distance may vary depending on camera and NVR specifications.
※
When using the camera PoE function, the transmission distance may vary depending on the camera
type.
