Seedburo 1200D Manual Download Page 4 | Manualshive

Page: 4 / 26

Seedburo 1200D Manual Download Page 4

Seedburo 1200D

®

Digital Moisture Tester Manual

3

1

UNPACKING

Before shipment, your new

Seedburo Model 1200

®

D Digital Moisture

Tester

has been thoroughly tested and found free of defects. Upon

unpacking  the  unit,  please  inspect  for  any  visual  damage  before
continuing.    If  any  damage  or  missing  part  is  noticed,  please  retain  the
packing  material  and  contact  the  office  from  which  the  unit  was
purchased.

The

Model 1200D

®

is shipped, along with a universal power supply

with  the  DUMP  CELL  and  the  GRAIN  CELL  disconnected.    Unpack
both cells and verify that the serial numbers are identical.  The utilization
of  components  with  different  serial  numbers  may  result  in  inaccurate
results, since all units are carefully calibrated in the factory to obtain the
most accurate results.

The

Model 1200D

®

should be installed and maintained in a level

position in a location where the ambient temperature will be between
50°F and 95°F.

«
...
2
3
4
5
6
...
»

Summary of Contents for 1200D



























Reviews:

No comments