Seedburo 1200D Manual Download Page 16 | Manualshive

Page: 16 / 26

Seedburo 1200D Manual Download Page 16

Seedburo 1200D

®

Digital Moisture Tester Manual

15

4.4 SAMPLE SCREEN MODE

In this Mode the user can choose the sample type of the grain being
tested. Besides the sample name, the moisture and temperature ranges
are  displayed.    The  NEXT  and
PREV  keys  are  used  to  scroll
forward  or  backward  in  the  list  of
possible  sample  types.    The  list  of
the  sample  types  is  given  in  the
Appendix.  This  mode  is  exited  by
either  pressing  the  MENU  key
which  brings  the  unit  back  to  the
Menu  mode,  or  by  pressing  the
MEASURE  Key  which  will  start
the measurement routine.

Sample Mode Screen

4.5 MEASURE MODE

1.

Attach  empty  Grain  cell  and
DUMP cell to the unit.  Make sure
that  the  wings  on  the  DUMP  cell
are closed so that when the sample
is  poured  in  it  does  not  fall  into
the Grain cell.  If the wings are not
closed,  just  flip  the  DUMP  cell
upside  down  over  the  Grain  cell.
Follow

screen

by

manually

pressing DUMP CELL knob.

Measure Screen 1

The unit will take temperature and then will display % moisture.

2.

At this point the unit will change to
the size control screen and display
% Moisture.

If the average mode is enabled (AVG

CORN TO 21%
(8 TO 21% MOIST)
MOISTURE RANGE:

9.8 TO 20.0

TEMP. RANGE:

40 F TO 99 F

NEXT PREV MENU

1/10/2003 18:22
USER: MOT
CORN TO 21%

DUMP 250 gr. INTO
GRAIN CELL THEN
PRESS MEAS.

ABORT

1/10/2003

CORN TO 21%

15%

ON-LN-TEMP. SAMPLE

«
...
14
15
16
17
18
...
»

Summary of Contents for 1200D



























Reviews:

No comments