:
Dial/Answer
(1) Call out or answer a call.
(2) Press
to put a call on hold, release the call by pressing
again.
: Hang up
(1) End a call or refuse an incoming call.
(2) Press the key to go back to the previous menu.
:
Press to input “+” at ready state, else input “*”.
:
Press to scroll ring style at ready state, else input “#”.
0-9: Digital keys
(1) Press to input digital numbers.
(2) Press to send DTMF message while talking.
2.2 Base station’s Instruction
:
Handfree Key
(1) Press to active the
Handfree function
(2) Press hold to register the
handset.
Speaker light:
(1) During a call via handset, pressing the Handfree key, the
speaker light will flash.
(2) The speaker light will be on when Handfree function is
active, otherwise it is off.
Charge light:
(1) When the handset’s battery is full, the light will be on.
(2) When the handset’s battery is flat, the light will flash.
(3) When the handset is taken away from the base, the light is
off.
2.3 Hardware installation
2.3.1 Connecting your base to your PC
Connect the base to the PC’s USB port with USB cable.
2.3.2 Install
Battery
Please install the battery as the picture shows. The LCD shows
.
If nothing is shown, please place the handset on the
base, the battery will be charged.
5
4