2.10 Auto-select RF channel
This function is effective to improve the quality of handset’s
voice. The handset will change the RF channel automatically
when the voice is not so good.
(1) Right click the icon
on the taskbar and select
Advance
(2) The window is shown as below:
(3)
Select
Auto selection RF Channe
to enable this function.
(4)
Click the button “
OK
” to save the setup.
2.11 Select RF channel by manual
If there is more than one USB Wireless Phone in the room, and
the quality of the voice is not so good, please select the RF
channel by manual.
(1) Right click the icon on the taskbar and select Advance.
(2) The window is shown as below:
(3) Enter the number from the PC’s keypad
.
Note:
The USB Wireless Phone used in one room should use
different channel, please make sure to select a channel
which is not used by other USB Wireless Phone.
(4) Click the button “
OK
” to save the setup.
14
15
